The Best Advice About I’ve Ever Written

Undergoung Utilities and their Standard Colors

It is now easier to know what an underground utility line is for. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Although not completely eliminated, risks today have been reduced. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. People can call 811 to prevent these incidents, before they proceed with digging their property. Utility companies can then mark out their respective lines when you call them out.

Marking lines may lessen the risks but there are time when accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. This has made it easier to locate utility lies underground and other important things. Companies can locate their utility lines if any property owner calls 811.

Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

Pink lines are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Electric power lines, cable, conduit, and lighting cable use red lines. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.

Click here now if you want to learn more about the color coding of utility lines. Click here for more.